Clevis Pin 1/4 x 1-1/2 Zinc Low Carbon Steel
- Material: Steel Zinc Plated
- Shank Dia min/max: 1/4 (.243/.248)
- Head Dia min/max: .365/.380
- Shank Length min/max: 1.500 /1.520
- Hole Diameter Nominal: .151/.166
Clevis Pin 1/4 x 5/8 Zinc Low Carbon Steel
- Material: Steel Zinc Plated
- Shank Dia min/max: 1/4 (.243/.248)
- Head Dia min/max: .365/.380
- Shank Length min/max: .625 /.645
- Hole Diameter Nominal: .151/.166
Clevis Pin 1/4 x 1 Zinc Low Carbon Steel
- Material: Steel Zinc Plated
- Shank Dia min/max: 1/4 (.243/.248)
- Head Dia min/max: .365/.380
- Shank Length min/max: 1.000 /1.020
- Hole Diameter Nominal: .151/.166
Clevis Pin 1/4 x 1-1/4 Zinc Low Carbon Steel
- Material: Steel Zinc Plated
- Shank Dia min/max: 1/4 (.243/.248)
- Head Dia min/max: .365/.380
- Shank Length min/max: 1.250 /1.270
- Hole Diameter Nominal: .151/.166
Clevis Pin 5/16 x 3/4 Zinc Low Carbon Steel
- Material: Steel Zinc Plated
- Shank Dia min/max: 5/16 (.306/.311)
- Head Dia min/max: .432/.444
- Shank Length min/max: .750 /.770
- Hole Diameter Nominal: .151/.166
Clevis Pin 3/8 x 1-3/8 Zinc Low Carbon Steel
- Material: Steel Zinc Plated
- Shank Dia min/max: 3/8 (.368-.373)
- Head Dia min/max: .490/.510
- Shank Length min/max: 1.375 /1.395
- Hole Diameter Nominal: .088/.103
Clevis Pin 3/8 x 1-1/2 Zinc Low Carbon Steel
- Material: Steel Zinc Plated
- Shank Dia min/max: 3/8 (.368-.373)
- Head Dia min/max: .490/.510
- Shank Length min/max: 1.500 /1.520
- Hole Diameter Nominal: .088/.103
1/2 Clevis Pins x 2-1/2 long
- Material: Steel Zinc Plated
- Shank Dia min/max: 1/2
Cotter pins are reusable metal fasteners that are used in conjunction with clevis pins to join two machine parts or pieces of equipment. Standard cotter pins, also known as cotter keys, or split keys, are inserted through the cross-holes in clevis pins; they feature two parallel tines that are bent ...
SAE clevis pins are manufactured to meet dimensional standards established by the Society of Automotive Engineers (SAE). Like all clevis pins, SAE rated models are similar to bolts, but without threading and with a cross-hole near the end opposite the flanged head. This hole allows for the insertion of a ...
